There are a number of ways to turn off The Schwinn 170 upright bike after you finish your workout.
In today’s article we are showing you how to turn off Schwinn 170. As well as different methods you can use to power this model off.
Without further ado, let’s get right into it!
How To Turn Off Schwinn 170?
There are a few different ways that you can turn off your Schwinn 170 upright bike.
The first and the easiest one is to do the opposite of what you did to turn it on, to:
1. Stop pedaling
Taking a few steps forward on the machine should power up the display. By doing the polar opposite you get the opposite result.
The console does not have an on/off switch button. The simplest way to power off your Schwinn 170 machine is to just step out of it and it should power off by itself.
If the console doesn’t receive any input in approximately 5 minutes, it will automatically shut off and go into sleep mode.
After 5 minutes of inactivity, the console will power down automatically.
The next method is to turn off the machine completely by,
1. Stop pedaling
This is one of the oldest tricks in the book, but it can still be effective in limiting your machine’s use after finishing exercising.
The power cord on your bike is located at the bottom of the wheel in the front, right above the base of the machine.
After you successfully locate it, unplug it from the power outlet and the machine should power off completely.
Schwinn 170 upright bike is one of the best commercial recumbent exercise bikes on the market today.
After you successfully turn on Schwinn recumbent bike, all you need to do to turn it off is either remove the power cord from the power outlet, or simply just step off the machine and the console will enter into an auto shut down mode after 5 minutes of inactivity.
Is There A Reset Button On the Schwinn 170 upright bike?
If you own a Schwinn 170 model, you’ll want to make sure that you also find and use the reset button on the machine.
Schwinn 170 bike doesn’t have a specific reset button that you can just press on to perform a reset to the machine.
But you still can access the reset mode by unplugging the unit from the electrical outlet for 3 minutes. Then plug it back on.
During data entry for a program the Stop key performs a previous screen or segment function. This allows you to go back to change programming data.