After you finally have the Schwinn elliptical machine at your home gym set up, then you may be wondering how to turn on Schwinn elliptical?
Well, you are in the right place.
In this article, we’ll go over how to turn on Schwinn elliptical in a simple and easy to follow guide. As well as a list of reasons why your Schwinn elliptical machine doesn’t turn on.
Without further ado, let’s get right into it!
How To Turn On Schwinn Elliptical?
The first step to turn on Schwinn elliptical is to,
1. Plug In The Power Cord
Before committing this step it’s worth mentioning that this product must be grounded.
If the elliptical machine should malfunction or break down, grounding provides a path of least resistance for electric current, reducing the risk of electric shock.
The Schwinn is equipped with a cord having an equipment-grounding conductor and a grounding plug.
Here is how to plug in the power cord:
Simply plug the power cord into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances(the outlet must be on a nominal 120-volt circuit).
2. Switch The Power Switch Into A Reset Position
After you finish plugging in the power cord, try to locate the power switch on the frame near the power cord.
If you are having trouble finding it, just follow the power cord to where it inserts into the elliptical, and you will find it right next to it.
Turn the power switch to the reset position. The display will then turn on and the console will be ready for use.
As with all three of the Schwinn series, when you turn on the power for the first time the incline system may start to calibrate automatically.
During this process the frame will move upward and downwards while it calibrates. The incline system is fully calibrated once the frame stops moving.
When it is first powered on, the console will perform an internal self-test.
During this time, all the lights will turn on, the Message Window display will show a software version, and the Distance Window will display an odometer reading.
3. Start Exercising
The Schwinn elliptical now is ready to start exercising. If you would like to get straight to working out you can simply use manual mode where you simply press the start button or start pedaling.
The Quick Start program lets you start a workout without entering any information.
After pressing the Quick Start button, hop into your Schwinn elliptical, hold the handlebars or the upper body arms and step onto the pedal that is in the lower position.
Then, step onto the other pedal and start moving the pedals until they begin to move with a continuous motion
The Schwinn pedals can turn in either direction.
However, it is recommended that you turn the pedals in the direction shown by the arrow.
Reasons Why Schwinn Elliptical Won’t Turn On
The elliptical machine is a complex piece of machinery. From the motors that drive the pedals to the computer chip inside, every part is designed with specific functions in mind.
When one part fails, others are negatively impacted as well.
These are some things to check in order to figure out what’s wrong with your machine before calling a repair technician:
1. Check The Basics First
Before you jump right into trying troubleshooting tips or trying to figure out what’s wrong with your elliptical, make sure there isn’t something else wrong that could cause your machine to not work.
The first thing you should do is check if your machine is plugged into an outlet and the cord is securely attached.
Check if everything that touches the pedals is in good working order. The belt is tight, and the Pulley is in good shape.
2. Check If The Drive Belt Worn
The belt is the part that connects the pedals to the drive system.
If the elliptical drive belt is no longer in good shape, it will cause the pedals to get stuck. This will cause your elliptical to not work.
The best way to check if the belt is worn is to look at the belt from above. If there are noticeable grooves “wear spots” in the belt, your belt is worn.
The grooves will cause the belt to slip on the pulleys inside, which will cause your elliptical to stop working.
How to replace the elliptical machine drive belt?
To replace your belt, follow the steps below:
- Unplug your elliptical. This will prevent any accidents.
- Remove the cover plates off the back of the machine.
- Unplug the motor cable from the motor.
- Remove the cover off the flywheel.
- Now you can remove the belt.
- Replace the belt and re-install the cover plates.
3. Are All The Screws Tight?
The next thing you should check is to ensure that all the screws that hold the machine together are tight.
The best way to check if the screws are tight enough is to go back to the front of the machine and check the level of the screws.
If any of them is loose, then the machine will not work correctly.
If you find any loose screws, then tighten them up before moving on to the next tip. The easiest way to do this is with a screwdriver.
But before you tighten screws, make sure not to turn them too far.
The screws should just be snug enough for the machine to operate without falling apart.
Here are the steps to follow to check if the screws are tight enough:
- Unplug your elliptical. This will prevent any accidents.
- Remove the cover plates off the back of the machine.
- Now you can access the front and back of the flywheel.
4. Is The Elliptical Plugged In Correctly?
The next thing you should check is to make sure the plug on the cord is firmly seated in the outlet.
Sometimes when the cord gets lodged in the outlet, this can cause your machine to stop working.
If you find that your machine is not turning on because of an outlet issue, here is what to do:
- Unplug your elliptical.
- This will prevent any accidents.
- Unplug the cord from the outlet.
- Pull out any excess cord.
- Re-insert the plug into the outlet.
5. Is There A Mechanical Issue?
If none of the above have worked to fix your Schwinn Elliptical, you’ll have to check the mechanical nature of your machine to see if there is a problem.
There could be a problem with the gear train and flywheel inside your machine.
When you turn the pedals, the gear train inside may not be turning the flywheel fast enough, as this will cause your machine to not work correctly.
To fix this problem, follow these steps:
- Unplug your elliptical. This will prevent any accidents.
- Remove the cover plates off the back of the machine.
- Now you’ll need to disconnect the electrical components from the drive system.
- You may need to remove the console from the machine.
- Now you can reach the gears inside the gear train and the flywheel.
6. Call A Repair Technician
If none of the above have worked for you, then you’ll have to call a repair technician.
There could be a problem with the gear train and flywheel inside your machine, or there could be a problem with the console.
If you decide to call a service technician, make sure you have all of your receipts, parts, manuals, and other paperwork ready to hand over.
Also, make sure you know exactly what the service person needs to see.
Also keep in mind that waiting a few days for a repair technician can save you money. If your machine needs to be ordered out, the technician may be able to get the part on the same day, or the same week.
Bottom Line
Schwinn elliptical cross trainers are one of the best elliptical machines for apartments on the market today.
As you can see, there are a number of steps to take in order to safely and successfully turn on Schwinn elliptical series.
All you need to do is plug in the power cord into an appropriate outlet that has been properly installed and grounded in accordance, turn the switch button into a reset position, and then you should be able to start using the elliptical machine without any issues.
FAQ
How Do I Reset My Schwinn Elliptical?
If you have any issues with your Schwinn elliptical console, you probably would be wondering how to reset this machine.
In order to do that, you simply unplug the machine from the electrical outlet for 3 minutes then plug it back to the outlet.
Does Schwinn 470 elliptical have Bluetooth?
Yes, Shwinn elliptical machines do have Bluetooth. You can track time, distance and calorie goals and transfer metrics via Bluetooth to the Explore the World App and other popular apps.
With Explore the World App you can virtually travel the globe from the comfort of home and the workout resistance would automatically adjust in real-time to the speed of your Bluetooth enabled Schwinn Fitness products.
How much does a Schwinn 470 elliptical weigh?
The Schwinn elliptical machine weighs 186 Pounds.
