How To Turn On Sole E95 Elliptical?

After you finally have the Sole E95 elliptical machine at your home gym set up, then you may be wondering how to turn on Sole E95 elliptical?

Well, you are in the right place.

Today we are making a step by step guide on how to turn on Sole E95 elliptical and get started using it. As well as a list of reasons why your Sole E95 Elliptical doesn’t turn on, and how to fix them.

Without further ado, let’s get right into it!

How To Turn On Sole E95 Elliptical?

sole e95 elliptical machine picture from my garage gym

The first step to turn on Sole E95 elliptical is to,

Step1: Plug In The Power Cord

Before committing this step it’s worth mentioning that this product must be grounded. 

If it should malfunction or break down, grounding provides a path of least resistance for electric current, reducing the risk of electric shock. 

The Sole Fitness E95 is equipped with a cord having an equipment-grounding plug. 

Here is how to plug in the power cord:

Simply plug the power cord into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances(the outlet must be on a nominal 120-volt circuit).

A temporary adapter may be used to connect the power cord to a 2-pole receptacle if a properly grounded outlet is not available.  

Step2: Switch The Power Button Into A Reset Position.

After you finish plug in the power cord. 

Simply locate the power switch where the line cord plugs into the unit on the left side near the front.

If you are having trouble finding it, just follow the power cord to where it inserts into the elliptical, and you will find it right next to it.

Turn the power switch to the reset position. The display will then turn on and the console will be ready for use. 

When it is first powered on, the console will perform an internal self-test.

During this time, all the lights will turn on, the Message Window display will show a software version, and the Distance Window will display an odometer reading

Step3: Start Exercising On The Elliptical

female trainer exercising on an elliptical machine

To mount the elliptical, just hop into the machine, hold the handlebars or the upper body arms and step onto the pedal that is in the lower position. 

Then, step onto the other pedal and start moving the pedals until they begin to move with a continuous motion

The Sole E95 pedals can turn in either direction. 

However, it is recommended that you turn the pedals in the direction shown by the arrow.

How To Turn On Bluetooth On Your Sole E95 Elliptical?

In order to help you achieve your exercise goals, Sole brand has added an exciting new feature to this product. 

Your new E95 exercise machine comes equipped with a Bluetooth transceiver that will allow it to interact with selected phones or tablet computers via the Sole Fitness App. 

So you need to download the free Sole Fitness App from the Apple Store or Google Play, and follow the instructions in the App to sync with your exercise machine. 

sole-fitness-e35 elliptical machine from my home gym setup

Here is how to Sync Sole App with your elliptical machine: 

  1. After downloading the App , make sure Bluetooth is enabled on the device you want to pair, then tap the icon in the top left corner to search for Sole equipment. 
  2. After the equipment is detected, tap Connect. 

When the App and equipment are synced, the Bluetooth icon on the equipment’s console will light up.

However, if the elliptical is not connected to the App, the console will display “SYNC” when the workout is over. 

This will allow you to view current workout data on three different Display screens on your device. 

You can easily switch back and forth from the workout display view to the internet/social media/email sites via icons on the display screen. 

When your workout is finished, the data is automatically saved to the built-in personal calendar for future reference.

Reasons Why Sole E95 Elliptical Won’t Turn On?

The elliptical machine is a complex piece of machinery. From the motors that drive the pedals to the computer chip inside, every part is designed with specific functions in mind. 

When one part fails, others are negatively impacted as well. 

picture of sole fitness e25 from my garage gym

These are some things to check in order to figure out what’s wrong with your machine before calling a repair technician:

1. Check The Basics First.

Before you jump right into trying troubleshooting tips or trying to figure out what’s wrong and why is Sole E95 elliptical display not working , make sure there isn’t something else wrong that could cause your machine to not work. 

The first thing you should do is check if your machine is plugged into an outlet and the cord is securely attached. 

Check if everything that touches the pedals is in good working order. The belt is tight, and the Pulley is in good shape. 

2. Check If The Drive Belt Worn.

picture of schwinn 430 elliptical machine from my home gym

The belt is the part that connects the pedals to the drive system. 

If the elliptical drive belt is no longer in good shape, it will cause the pedals to get stuck. This will cause your elliptical to not work. 

The best way to check if the belt is worn is to look at the belt from above. If there are noticeable grooves “wear spots” in the belt, your belt is worn. 

The grooves will cause the belt to slip on the pulleys inside, which will cause your elliptical to stop working. 

How to replace the elliptical machine drive belt?

To replace your belt, follow the steps below: 

  1. Unplug your elliptical. This will prevent any accidents. 
  2. Remove the cover plates off the back of the machine. 
  3. Unplug the motor cable from the motor. 
  4. Remove the cover off the flywheel. 
  5. Now you can remove the belt. 
  6. Replace the belt and re-install the cover plates.

3. Are All The Screws Tight?

The next thing you should check is to ensure that all the screws that hold the machine together are tight. 

The best way to check if the screws are tight enough is to go back to the front of the machine and check the level of the screws. 

If any of them is loose, then the machine will not work correctly. 

If you find any loose screws, then tighten them up before moving on to the next tip. The easiest way to do this is with a screwdriver. 

But before you tighten screws, make sure not to turn them too far. 

The screws should just be snug enough for the machine to operate without falling apart. 

Here are the steps to follow to check if the screws are tight enough:  

  1. Unplug your elliptical. This will prevent any accidents. 
  2. Remove the cover plates off the back of the machine. 
  3. Now you can access the front and back of the flywheel.

4. Is The Elliptical Plugged In Correctly?

The next thing you should check is to make sure the plug on the cord is firmly seated in the outlet. 

Sometimes when the cord gets lodged in the outlet, this can cause your machine to stop working. 

If you find that your machine is not turning on because of an outlet issue, here is what to do:

  1. Unplug your elliptical. 
  2. This will prevent any accidents. 
  3. Unplug the cord from the outlet. 
  4. Pull out any excess cord.  
  5. Re-insert the plug into the outlet.

5. Is There A Mechanical Issue?

If none of the above have worked to fix your Sole E95 Elliptical, you’ll have to check the mechanical nature of your machine to see if there is a problem. 

There could be a problem with the gear train and flywheel inside your machine. 

When you turn the pedals, the gear train inside may not be turning the flywheel fast enough, as this will cause your machine to not work correctly. 

To fix this problem, follow these steps: 

  1. Unplug your elliptical. This will prevent any accidents.  
  2. Remove the cover plates off the back of the machine.  
  3. Now you’ll need to disconnect the electrical components from the drive system. 
  4. You may need to remove the console from the machine. 
  5. Now you can reach the gears inside the gear train and the flywheel.

6. Call A Repair Technician

a repair technician working on his laptop

If none of the above have worked for you, then you’ll have to call a repair technician. 

There could be a problem with the gear train and flywheel inside your machine, or there could be a problem with the console. 

If you decide to call a service technician, make sure you have all of your receipts, parts, manuals, and other paperwork ready to hand over. 

Also, make sure you know exactly what the service person needs to see. 

Also keep in mind that waiting a few days for a repair technician can save you money. If your machine needs to be ordered out, the technician may be able to get the part on the same day, or the same week.

Bottom Line

Sole E95 elliptical cross trainer l is one of the best ellipticals for low ceilings on the market today.

As you can see, there are a number of steps to take in order to safely turn on this elliptical machine.

All you need to do is plug in the power cord into an appropriate outlet that is properly installed and earthed in accordance, turn the power switch button into a reset position, and then you should be able to start using the elliptical machine without  any issues.

Scroll to Top