How To Turn On Superfit Treadmill?

Costway is one of the most popular fitness brands in North America, well-known for building quality treadmills. 

If you have never used a Superfit treadmill before, chances are you don’t know how to operate it.

Well, the process is so easy and only takes less than a minute.  

Follow this step by step guide on how to turn on Superfit treadmill and safely start using it for the first time.

Without further ado, let’s get right into it!

How To Turn On Superfit Treadmill? – Step by Step Guide

The first step to turn on the Superfit tread is to,

1. Plug in the power cord

Before committing this step it’s worth mentioning that this product must be grounded. 

If it should malfunction or break down, grounding provides a path of least resistance for electric current, reducing the risk of electric shock.

Your Superfit treadmill, like other electronic equipment, can be damaged by sudden voltage changes in your home power.

Plug the power cord into an appropriate outlet that is properly installed and reliably grounded.

2. Turn on the power switch

The next step is to turn on your treadmill is to flip the power switch at the base of the machine near the power cord.

3. Pair the remote controller to the treadmill

After you power on the treadmill, hold the remote control and aim it at the display window of the treadmill for 10 seconds, then unplug the tread security lock.

Meanwhile, press the Start/Pause button on the remote control for 3 seconds, and the system will make a sound indicating that the pairing process has been successful.

Now the remote control can be used to the control the Superfit treadmill normally.

4. Attach the safety key into place

Before you can start using your tread, locate the clip attached to the safety key and and slide the clip securely onto the waistband of your clothes.

Next, make sure it is fully inserted into the safety key port as it is necessary to turn on the tread. 

The key usually has a clip that allows you to attach the key to your activewear during the workout for safety purposes. 

If the safety key is detached, the treadmill will stop immediately.

5. Start walking/running

male athlete in black tank top using a treadmill

Do not start the tread before stepping onto the running surface. Step onto it from the rear, using handlebars for balance. Avoid leaning in and putting your full weight on the handrails.

With one hand grabbing the handlebars, the other hand holding the remote control and power it on to wake the tread (if not already on) and begin the belt movement.

The treadmill starts up in a delay of 3 seconds and runs at a speed of 0.6MPH.

You adjust the tread to the desired speed using the ( +/- )buttons on the remote control to increase or decrease the speed slowly.

Final Thoughts

As you can see, there are a number of steps to take in order to successfully and safely turn on Superfit Treadmill for the first time.

You just need to follow these basic rules, and in just a couple of minutes, you can start using it:

  1. Plug the power cord properly into your treadmill, then flip the power switch on.
  2. Make sure you have your Safety key in place.
  3. Ensure the remote control is properly paired with the treadmill.
  4. Walk, jog, or run at your desired pace.
Scroll to Top