NordicTrack Treadmill Belt Replacement

NordicTrack treadmill remains to be one of the most popular fitness equipment, whether used in the gym or at home. 

Like any other complicated machines, NordicTrack products require some maintenance, and different parts may need replacement from time to time.

In today’s guide we are helping you go through the NordicTrack treadmill belt replacement process to ensure the safety for you and other users for years to come.

Without further ado, let’s get right into it!

Signs a NordicTrack Treadmill Belt Needs Replacement

Nordictrack treadmill equipment in front of a white bricked wall

Symptoms like fraying edges, excessive smoothness, sluggish belt movement, or slippage can all be signs that your treadmill belt requires maintenance. But to determine whether you are replacing the belt or not, you need to know exactly what to look for and what tests to perform. 

First off, turn on NordicTrack treadmill and start running it at the slowest speed possible. Pay close attention to the edges of the belt and make sure they aren’t curling or frayed. 

Fraying or curling can be an obvious sign that you should be replacing the treadmill belt.

Next, loosen your treadmill belt using a screwdriver in order to be able to visually inspect and feel the interior and exterior belt surfaces. 

Avoid loosening the bolts too much, you want them just loose enough to be able to slide your hand inside the belt and visually inspect the underside of the belt. 

After the tension bolts are loose, run your hand along the underside and top to check for signs of excessive wear. This may come in the form of discoloration or extreme smoothness.

Discoloration for most treadmill belts will seem dark, almost black. 

Also if you feel excessive smoothness in the areas where you walk, your belt needs to be replaced. 

picture of a female person using a treadmill

Next, you want to inspect the seam of the belt. This is a particularly vulnerable area of the belt and can easily be the source of many problems.

Identify the seam where the belt has been connected, and make certain that it isn’t coming undone.  

Run your hand along the seam on the underside of the belt, check for any signs of wear and tear on the top of the belt seam. 

If the belt seam edges are fraying or coming apart, you need to replace the tread belt.

NordicTrack Treadmill Belt Replacement Toolkit

For NordicTrack treadmill belt replacement process, tools you will need are: 

  • Treadmill belt.
  • Allen wrench.
  • Phillips screwdriver.
  • A marker.

How To Replace Nordictrack Treadmill Belt – Step By Step Guide

Nordictrack treadmill picture ready to be used

NordicTrack Treadmills may vary in model style, the procedure demonstrated here is very similar. 

Make sure to unplug and turn off NordicTrack treadmill before committing the guide below so that there’s no risk of an electrical shock. 

Here is a step-by-step guide on how to change NordicTrack treadmill belt:

STEP 1: Remove the motor hood cover

Remove the motor hood cover from the machine and place the walking deck into the storage position.

STEP 2: Remove end caps

Go to the back of your NordicTrack unit and remove any end caps. 

STEP 3: Remove deck bolts

Remove the screws attached to the underside of the walking platform. 

STEP 4: Remove side foot rails

Lower the walking deck back down, then unscrew and remove the side rails.

STEP 5: Mark the rollers position 

Use a marker to mark out where the rollers are on the front and back bolts.

STEP 6: Remove the rear roller

Loosen the left and right screws on the idle rollers at the front of the roller and remove them.

Next remove the roller at the back of the treadmill. 

Nordictrack 1750 treadmill beside a bright window

STEP 7: Remove front roller

With the belt loosened, While turning the drive roller by hand, pull on the inside of the drive belt in order to walk it off the drive roller pulley.

Now remove the drive roller.

STEP 8: Remove belt

Using an Allen wrench, remove the four bolts found in each corner of the walking board. 

With two people, lift the walking board up so that you can slide the running belt off the treadmill.  

STEP 9: Reinstall the new belt

After you’ve removed the old belt, Carefully place the new walking belt around the walking board.

STEP 10: Reassemble the walking board

Using your Allen wrench, replace the bolts in each of the four corners of the walking board.
Screw the isolator screws back into place.

Nordictrack treadmill 2490 stored in a corner of a room

STEP 11: Reassemble the front roller

Slide the drive roller into place. Walk the motor belt belt by hand onto the pulley just as it was taken off.

STEP 12: Reassemble the rear roller

Replace the idler roller. Screw the idler bolts back in. 

STEP 13: Reassemble the side foot rails

Reinstall and screw the side rails back on.

STEP 14: Check the belt  

After successfully replacing the walking belt with a new one, lift the new belt in the middle to make sure it’s appropriately tightened.

It should lift between 2 and 3 inches away from the treadmill, but no more. 

You also want to make sure the gap on both side of the walking belt are equal.

Get on how to adjust NordicTrack treadmill belt if the belt is not properly aligned and tensioned and needs adjustment. 

STEP 15: Put the motor hood back on

Once you are done with replacing and adjusting your NordicTrack walking as called for, put the motor hood and screws back on.

How Much Does a NordicTrack Treadmill Belt Replacement Cost?

NordicTrack treadmill belt replacement on Amazon is $124.99. This doesn’t include the cost for a repairman to install it.

The cost of installation highly depends on your chosen repair company charges hourly. You may be looking at an additional $100 to $200, making the cost of replacement anywhere from $225 to $325 total.

However, if you aren’t willing to pay for a repairman service, you still can cut this cost of installation by replacing your NordicTrack belt all by yourself.

It is a lot cheaper to replace the walking belt yourself instead of paying someone else to do it for you. 

Just follow the above guide on how to replace a NordicTrack treadmill belt and you’ll successfully get your machine running in no time. 

Final Thoughts

A NordicTrack treadmill belt is the most important part of the treadmill, and unfortunately at some point, you probably will have to replace it at some point. 

Today’s guide has given you a lot of useful information to help you understand when you need to replace your NordicTrack treadmill belt and how to do it all by yourself.  

After successfully replacing the belt, you have to make sure the running deck if it is well oiled. If not, get on how to lubricate NordicTrack treadmill belt guide in order to keep the new belt under good conditions.

Scroll to Top