Sunny Exercise Bike Monitor Display Not Working

Sunny Fitness remains one of the most popular fitness brands when it comes to at home cardio machines. But like any other complicated machines, Sunny’ s products may malfunction in a variety of ways. 

If your Sunny exercise bike monitor is not working, you’re not alone. This is a common issue that many people experience with their exercise equipment. 

Let’s review the most troubleshooting methods to follow in order to find out why your Sunny exercise bike monitor display not working before calling the manufacturer or a repair person.

Without further ado, let’s get right into it!

Why Is My Sunny Exercise Bike Display Not Working?

picture of sunny health and fitness exercise bike

There are multiple reasons why your Sunny exercise bike won’t turn on and to stop functioning unexpectedly. 

The problem might be something you can fix yourself, ranging from simple possibilities such as a bad battery, loose or incorrect wire connections.

The following troubleshooting guides will help you identify and fix your exercise bike screen issues and get back to riding again.

Sunny Exercise Bike Display Not Working – Troubleshooting Guides

1. Replace the batteries

Most console problems are the result of low batteries. If your Sunny bike monitor doesn’t power up, or the display readout starts growing dim while the machine is in operation, the first thing you have to do is replacing the batteries.

Sunny Fitness bikes require two 1.5V AAA batteries in all of their models as these will give better performance and last longer.

First, press the buckle of battery cover on the back of the Computer to remove the battery cover, then remove and discard the old AAA batteries.

Replace all of the batteries, not just one if you happen to have one good one. 

Make sure the new batteries are facing the right direction and that the connections are clean, and free of damage before you put the battery cover back to the back of the display monitor.

2. Power cycle Sunny exercise bike

If your Sunny bike monitor is frozen and unresponsive, one of the first thing you should do is reboot the machine.

This is a simple turn off and turn on process to help resolve any internal glitches that may be keeping the console from working. 

To power cycle Sunny bike, follow the instructions below:

First, flip the reset switch to off to power off the bike and wait for 30 seconds.

Next, flip the switch back to reset and check if the problem is still there.

3. Check the console wires connections 

picture of a Peloton bike

An exercise bike screen is an important part of exercising safely. You can use it to track your progress while exercising.

If there is an issue with the console wires or they are not fully connected, your Sunny bike won’t work.

Start off by checking the connections between the external wires. Look for damaged wiring and make sure the connection points are fully connected.

Next, unplug the machine from the outlet, and refer to your Sunny exercise bike owner’s manual for the assembly instructions to identify how to access the main wire. 

With the main wire now accessible, press the wire connectors together to make sure they’re properly connected. Ensure that all the connecting wires aren’t damaged or disconnected. 

Next, check the wires pins. These pins sit inside the plastic casing that connects the wire to the display screen. Make certain none of the pins have been broken or bent. 

If a bent pin is found, carefully bend it back into place.

Identify and check any pinch points the wire may have. Pinch points are any place the wire moves between two parts. 

If any of the wires are worn or damaged anywhere, submit a customer service request about how to replace them.

If no damage was found, reconnect the main wire and assemble everything back in. Plug your machine back in and check if the screen works now.

Final Tip

If none of the above fixes work, then you need to contact the Sunny Member Support Team. They will help you diagnose the problem and offer solutions.

If your equipment is still under warranty, the manufacturer may cover the cost to repair your machine. 

However, if you attempt to fix the bike yourself while it is under warranty, then you may void the warranty. 

In this case, only perform the troubleshooting tips recommended by your manufacturer.

Final Thoughts

After today’s article, you will be willing to know the reason why your Sunny exercise bike screen not working and the necessary steps to take in order to fix it.

Just make sure that the machine console contain a workable batteries that meets the power requirements of the machine.

Scroll to Top