The number one thing you must be looking for after your brand new Proform Pro 9.9 elliptical has just arrived, or after you disassemble your Proform elliptical to move it into your new place, is how to assemble this elliptical together.
Well, let’s jump into today’s step by step guide to Proform Pro 9.9 elliptical assembly. As well as what tools to make sure you have before you start the assembling process.
Without further ado, let’s get right into it!
Tools Needed To Assemble Proform Pro 9.9 Elliptical

The first step before you start the elliptical assembling process is to gather all the necessary tools.
You don’t want to go through with one step, then realize that something is lacking.
In order to assemble a Proform Pro 9.9 Elliptical machine, you are going to need the following tools:
- Phillips head screwdriver.
- Allen Wrenches.
- Hammer.
- Pliers.
In addition to the required tool, a second person to assist you through the assembling process is also going to be necessary here.
The assembling process is definitely a two-person job, so make sure you have a friend or your partner as an assistance in order to safely and successfully put the machine together.
Proform Pro 9.9 Elliptical Assembly – Step By Step Guide
Before you get started on the assembly process, head to my.proform.com on your computer and register your product.
This will activate your warranty and ensure priority customer support if assistance is ever needed.
If you do not have internet access, call Customer Care and register your product.

Step 1: Install the leg stabilizers
With your assistance’s help, place some of the packaging material under the rear of the frame.
If there are shipping supports attached to the rear of the Frame, remove the screws from the shipping supports, and discard the screws and the shipping supports.
Have the second person hold the Frame to prevent it from tipping while you complete this step. After you identify the two rear stabilizers, attach one to the Frame with three M10 x 20mm Screws.
Start all of the Screws, and then tighten them. Attach the other Rear Stabilizer in the same way.
Then, remove the packing materials from under the rear of the Frame.
Next, press the Rear Stabilizer cover onto the Frame. Then attach the Rear Stabilizer Cover with two M4 x 16mm Screws.
Repeat these steps with the front leg stabilizers to attach the front stabilizers and cover to the frame.
Step 2: Attach the upright
Raise the upright to the vertical position. Then secure it to the Frame with two M10 x 75mm Screws.
Next, slide the Shield Cover downward onto the Rear Shield.

Step 3: Install the upper saddle bracket
First you need to locate the Right Upper Saddle Bracket and the Lower Saddle Bracket on the right side of the elliptical.
Attach the Right Upper Saddle Bracket to the Lower Saddle Bracket with two M10 x 70mm Screws.
Step 4: Install the upper body arms
Start by identifying the Right Upper Body Arm and an Upper Body Arm Cover.

Next, slide the Upper Body Arm Cover onto the Right Upper Body Arm, then attach the Right Upper Body Arm to the Right Upper Body Leg with two M10 x 45mm Bolts and two M10 Locknuts.
Make sure that the Locknuts are in the hexagonal holes.
Then, slide the Upper Body Arm Cover downward and turn it so that it is flush with the Right Upper Body Leg.
Attach the Left Upper Body Arm in the same way.
After you finish with the assembling process and ensure all all screws are tight, plug in and turn on your Proform elliptical and test it by running on it for a few moments before use to make sure everything is working properly.
Conclusion
This guide will walk you through the ProForm Pro 9.9 elliptical assembly process. The assembly process is broken down into easy to follow steps in order to safely and successfully start using your Proform cross trainer.
Step 1: Install the leg stabilizers
Step 2: Attach the upright
Step 3: Install the upper saddle bracket
Step 4: Install the upper body arms
Make sure to lubricate Proform elliptical machine moving parts to get things running smoothly.