Weslo remains one of the most popular fitness brands when it comes to at home cardio machines. But like any other complicated machines, Weslo products may malfunction in a variety of ways.
If your Weslo Treadmill screen is not working, you’re not alone. This is a common issue that many people experience with their treadmill.
Let’s review the most troubleshooting methods to follow in order to find out why your Weslo treadmill display not working and fix it before calling the manufacturer or a repair person.
Without further ado, let’s get right into it!
Why Is My Weslo Treadmill Display Not Working?
There are multiple reasons for a Weslo treadmill screen to stop working and becomes unresponsive.
The problem might be something you can fix yourself, ranging from simple possibilities such as power supply problems, the installation does not meet the electrical power requirements, or the reed switch needs to be adjusted.
The following troubleshooting guides will help you identify and fix your Weslo treadmill display problem.
Weslo Treadmill Display Not Working – Troubleshooting Guides
1. Reboot the treadmill
If your Weslo treadmill screen is unresponsive, the first thing you should try is reboot the treadmill.
Next, plug the cable back in to see if the problem is still there. If rebooting the machine doesn’t solve the problem, try resetting your treadmill.
2. Reset the treadmill
Doing a reset to the treadmill screen might help resolve the screen issue.
Here is how to reset Weslo treadmill screen:
- Switch the power button On to turn on the treadmill.
- Next, look for the Stop and Speed Up button, then press and hold the stop and speed increase buttons at the same time. While still holding the buttons, insert the safety key into place, then release the buttons.
3. Check wires connections
If your tread screen doesn’t work, there could be a wiring issue.
Unplug the unit from the outlet before removing the protective covers. Refer to your owner’s manual for the assembly instructions to identify how to access the main wire.
With the main wire now accessible, press the wire connectors together to make sure they’re properly connected. Ensure that all the connecting wires aren’t damaged or disconnected.
Next, check the wires pins. These pins sit inside the plastic casing that connects the wire to the display screen. Make certain none of the pins have been broken or bent.
If a bent pin is found, carefully bend it back into place.
Identify and check any pinch points the wire may have. Pinch points are any place the wire moves between two parts.
If any of the wires are worn or damaged anywhere, submit a customer service request about how to replace them.
If no damage was found, reconnect the main wire and assemble everything back in. Turn on Weslo Cadence treadmill and check if the display works now.
4. Check The Reed Switch
If your Weslo display is still not functioning properly, you need to check its reed switch.
What you are going to do is remove the treadmill motor hood cover, then inspect and regulate the reed switch using a robust Phillips screwdriver.
The reed switch is mounted on the frame next to the front roller pulley.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the wall outlet and place it in a secure location, and wait 5 minutes before going through this process.
Once you have access to the reed switch, there is going to be a magnet glued into the front roller pulley. Check the distance between the switch and the magnet.
If the reed switch seems too close to the magnet, then it needs to be adjusted.
To adjust the reed switch, first loosen the screw attaining the reed switch without removing it, then move the tip manually until you successfully lengthen the distance between the magnet and the switch of ⅛ inch.
When the reed switch is correctly adjusted, make sure it is pointing directly at the magnet, then assemble the treadmill back together.
5. Check the outlet
If the screen on your treadmill is not functioning, always check if your power cable is connected properly to both the electrical outlet and the Treadmill’s deck.
A Weslo Treadmill display won’t function properly if there is a loose connection. The loose connection usually occurs if the treadmill power cable is not properly plugged into an electric outlet or the power cable is not properly connected to the power brick.
Next, make sure that the tread is plugged into an outlet that meets its power requirements.
The power requirements are: 100-125vac, 50-60Hz, 15 amp “dedicated circuit”.
Also make certain that the machine is not plugged into a GFCI outlet.
6. Check the power cord
If the electrical outlet works fine and the outlet meets the power requirements of your treadmill, unplug the machine to inspect the power cord.
Make sure the cord is connected properly to both the electrical outlet and the Tread’s deck.
Next, check all wires between the power cord connection and the motor control board. Reconnect any loose wires and repair any broken ones.
If the cord has been damaged then you may need to replace it with a new one.
If none of the above fixes work, then you need to contact the Member Support Team of your Weslo treadmill. They will help you diagnose the problem and offer solutions.
If your treadmill is still under warranty, the manufacturer may cover the cost to repair your machine.
However, if you attempt to fix the tread yourself while it is under warranty, then you may void the warranty.
In this case, only perform the troubleshooting tips recommended by your manufacturer.
Treadmill screens are an important part of exercising safely. You can use it to adjust things like speed, resistance and incline, and also useful for watching your progress while exercising.
After today’s article, you will be willing to know the reason why your Weslo treadmill display not working and take the necessary steps to fix it.